彩盒包裝的印刷工藝要注意事項？

文章作者：華政印務 發布時間：2021-08-18 41次

常用紙板：灰底白（白板紙）、單粉咭、雙粉咭、金卡紙、銀卡紙，定量在250-450g/m2，如果紙張不夠厚（強度不夠）可以用350克的紙板對裱。單張紙板常用于小盒形的包裝，如煙盒、藥盒、日化產品、食品等。
Common paperboard: white paperboard with gray background (white paperboard), single powder card, double powder card, gold card paper and silver card paper, with a ration of 250-450g / m2. If the paper is not thick enough (not strong enough), 350g paperboard can be used for mounting. Sheet board is often used in small box packaging, such as cigarette boxes, medicine boxes, daily chemical products, food, etc.
紙板裱坑紙：定量在250-450g/m2的紙板裱E坑（9坑）或F坑瓦楞紙，也有裱B坑瓦楞紙的彩盒。常用于電子產品、小家電、五金、通訊產品等。
Paperboard mounting pit paper: the paperboard with a ration of 250-450g / m2 is mounted with e-pit (9-pit) or f-pit corrugated paper, and there are also color boxes mounted with b-pit corrugated paper. It is commonly used in electronic products, small household appliances, hardware, communication products, etc.
濟南書刊雜志印刷

彩盒通常是由多種顏色組合而成,彩盒印刷的圖案不是一次成型,懂技術的公司,在印刷前應該先規劃好顏色的排序.如:
Color boxes are usually composed of a variety of colors. The printed patterns of color boxes are not formed at one time. Companies that understand technology should plan the color order before printing. For example:
(1)彩盒印刷色序是先印文字、線條、圖案，然后印滿版實地，可避免由于白板紙厚、印跡未干而相互碰臟擦壞。
(1) The color sequence of color box printing is to print words, lines and patterns first, and then print the full plate on the spot, so as to avoid mutual dirt and damage due to the thick whiteboard and wet imprint.
(2)將深顏色放在前面印，淺顏色后印，便于套印準確。
(2) Put the dark color on the front and the light color on the back to facilitate accurate overprint.
(3)先印網點圖像，后印連續調圖案、文字、線條，有利于套印準確，減少紙張伸縮影響。
(3) First print the dot image, and then print the continuous adjustment of patterns, words and lines, which is conducive to accurate overprint and reduce the influence of paper expansion.
(4)炎熱夏天，白紙板印單色時遇到紙張含水量不均勻、起皺、不平整、紙張表面強度差，引起掉毛、掉粉等情況，可采用先打空印一道水的措施。
(4) In hot summer, when printing monochrome on white paperboard, in case of uneven water content, wrinkling, unevenness and poor surface strength of the paper, resulting in hair and powder loss, the measure of empty printing with a layer of water can be adopted first.

聲明：文章來源于http://www.djmusic.net.cn/